Release Notes:
---------------------------------------------------------------------------

New Software Version:   3.0.18

New Features/Changes/Fixes: since 3.0.11

1) General Changes:
-------------------
- Contains several bugfixes and enhancements.


2) Fixes/Improvements:
----------------------
- If the SEH UTN Manager is started for the second time, the window of the SEH UTN Manager which is already running now appears instead of an error message.
- Fixed: The 'Printer Maintainance Tool' for Epson SL-DL700 does not work with SEH UTN Manager.
- Fixed: Handle leak caused by non-closed mutex handle. The number of open handles now is stable.
- Fixed: Faulty data transmission from Apple iPhones (bulk transfers with data bigger than 65k have been by processed incorrectly by the driver)
- SEH UTN Manager also used the VirtualStore of the Microsoft Registry. The manifest was changed so that the VirtualStore of the registry can no longer be written to.
Devices connected via myUTN functionality are now displayed in USB View and USBTreeView. In addition, the following IOCTLs directed to the host controller and hub are answered now:
IOCTL_USB_GET_NODE_INFORMATION
IOCTL_USB_GET_HUB_CAPABILITIES
IOCTL_USB_GET_HUB_CAPABILITIES_EX
IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX
IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME
IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION
IOCTL_USB_GET_ROOT_HUB_NAME
IOCTL_GET_HCD_DRIVERKEY_NAME
IOCTL_USB_USER_REQUEST (USBUSER_GET_ROOTHUB_SYMBOLIC_NAME)


3) New Devices:
---------------
- MCU boards by Silicon Labs now are supported


Release Notes:
---------------------------------------------------------------------------

New Software Version:   3.0.11

New Features/Changes/Fixes: since 3.0.8

1) General:
-----------
-

2) Changes: 
----------- 
- UTN Manager (Windows) is not executed with elevated privileges anymore 
  (no elevation prompt will pop up) 
- UTN Manager unattended installation: 
  + The installation path of a previous UTN Manager is now read correctly from      the registry and will be used as default installation location.
  + The command-line command /D did not work. It has been replaced by the 
    command /I, which sets the default installation directory when /S is used.

3) Fixes:
---------
- Fixes for the Fujitsu Scanners fi.7160 and fi.6140z
- For manually added UTN servers no SLP request will be sent anymore. This is 
  important for UTN servers which are accessed via the Internet.
- Revised Japanese strings
 
4) New Devices:
---------------
- Total Phase Aardvark I2C/SPI supported
- DaVinci Resolve dongle supported
- FTDI FT 232 is now supported
- electro suisse NIN 2015 digital dongle supported
- CryptoMate64 (USB Cryptographic USB Token) dongle supported
- Renishaw scanner


Release Notes:
---------------------------------------------------------------------------

New Software Version:   3.0.8

New Features/Changes/Fixes: since 2.x.x

1) General:
-----------
- new online help (version 3.0)
- Support for "compound USB devices" has been added. This is an extension of
  supported USB topologies and thus the range supported USB devices is extended.


2) Changes: 
----------- 
- Prolific FT 232 is now supported
- FTDI FT 232 is now supported
- AVM Fritz!Card USB v.2.x is now supported

3) Fixes:
---------
- utnm: The output of the device list ("getlist" command) is now sorted by port ID 
  and its formatting is revised.
- USB port keys can now be entered for myUTN-250s (fix).
- The device activation with Auto-Connect now occours without delay (fix).
- Auto-Connect now works if the port key control is activated (fix).
- Contains several minor bugfixes and enhancements.

 
Release Notes:
---------------------------------------------------------------------------

New Software Version:   2.0.7

New Features/Changes/Fixes: since 1.5.8

1) General:
-----------
- The UTN Manager 2.x.x is now available in two versions: MAC OS X and Windows
- Minimal installation (optional): Only the minimum required program features 
  without graphical user interface will be installed. Expert use only!

2) Changes: 
----------- 
- Overall stability improvements

3) Fixes:
---------
- UTN Manager used too much main memory → fixed
- Silent installation was always executed in minimal mode → fixed
- Actions returned error messages from other CLI applications → fixed
- UTN Manager in combination with a SafeNet Sentinel USB UltraPro dongle could cause a BSOD. → fixed


Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.5.8

New Features/Changes/Fixes: since 1.5.6

1) General:
-----------
- The UTN Manager now internally uses OpenSSL 0.9.8.u
- The UTN Manager now always launches in the visible area of the screen
- The display of properties in the UTN Manager has been revised and optimized

2) Changes: 
----------- 
- In addition to the IP address the following names are displayed:
  * in UTN Manager: the host name configured in the UTN-Server
  * in UTN Manager: the DNS name of the UTN-Server
  * in UTN Manager: the user who has connected to (activated) a USB device
  * in myUTN Control Center: the user who has connected to (activated) a USB
    device

3) Fixes:
---------
- In the command-line version of the UTN Manager, the "getlist" command did not
  work when the port key control was activated. → fixed
- In the UTN command line tool "utnm.exe", the command "getlist" did not work.
  → fixed
- The automatic re-activation of USB devices (e.g. after a cold start of the
  UTN server) was partially inconsistent. → fixed
- The use of mass storage devices in Windows XP could cause the SEH UTN service
  to crash. → fixed
- The display of the send and receive rates was faulty. → fixed



Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.5.6

New Features/Changes/Fixes: since 1.5.4

1) General:
-----------
- Display of the UTN Manager in Windows 7 (aero style) has been improved.
- Integration of UTN corrections for Windows 8 (optimization of bulk and
  interrupt transfers)
- Improvement of "Request Device". (The close button "X" and ESC are now linked
  to the refusal by default. Prior to that, it was possible to close the
  request window without saying yes/no).

2) Changes: 
----------- 
- When a device is requested, an error message is displayed if a TCP connection
  to the other UTN Manager cannot be established.
- If the UTN service crashed or was stopped and the UTN Manager is still
  running, a 10 second countdown that closes the warning about the stopped
  service now exists.
- If encryption is enabled, the buttons for activating and deactivating devices
  in the UTN Manager are unlocked for re-use after 20 seconds.

3) Fixes:
---------
- Photos were not copied correctly from the camera "PowerShot A 640" to the
  local computer.→ fixed
- The UTN port query on print servers (PS03a and PS1103) with UTN functionality
  did not work. → fixed
- In the UTN command line tool "utnm.exe", the command "getlist" did not work.
  → fixed
- If encryption was enabled, the feature "Activating the Device Automatically
  after the Start of a Selected Application" did not work anymore.→ fixed
- Time calculation in the Auto Disconnect behavior was faulty. → fixed
- The display of the send and receive rates was faulty. → fixed


Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.5.4

New Features/Changes/Fixes: since 1.4.16

1) General:
-----------
- Request an Occupied Device:
  You can request a device that is being actively used by another user.
  The other user will be informed about your request via a popup window. The user 
  can then terminate the connection to the USB device. When the device is shared, 
  the connection between the USB device and your client will be established 
  automatically.
- Auto-Disconnect: 
  This functionality allows for the automatic deactivation of a device connection 
  after a time defined.

2) Changes: 
----------- 
- Several minor improvements of driver and service which increase the all over
  stability of the UTN service in critical situations.

3) Fixes:
---------
- Kobil mIDentity compact (light and SmartToken) and Aladdin Knowledge Systen 
  HASP Token:
  A driver update of these devices drivers failed to automatically re-connect 
  to/with a myUTN device. → fixed


Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.4.16

New Features/Changes/Fixes: since 1.4.15

1) General:
-----------
- Code Signing: Code signing with new certificate (valid until 03/015).
  The updated certificate is installed into the certificate store of the
  target system ('trusted publisher')
- DNS name resolution: The dns name is now also displayed for a manually
  added server. Display of the IP address: In case of known dns names,
  the name is subsequently displayed in brackets. Display of the host
  name: Provided that the host name is known, it will be displayed and
  if not, the IP address is displayed. The IP address is updated via the
  dns name after a restart of the UTN Manager.
- Driver: Event logging mechanism (event viewer) implemented in the
  driver. New event log entries 'Missing heartbeat' and 'Heart beat
  error' added.  

2) Changes: 
----------- 
- Several improvements of driver and service which increase the
  stability of the UTN service in critical situations (e.g. when
  stopping the service while devices are activated, when shutting down
  Windows or when the connection to the myUTN is interrupted). → fixed

- Optimization "driver heartbeat": A missing heartbeat will be ignored
  by the driver, only if the second heartbeat is missing there will be a
  corresponding reaction. If the service is stopped, all devices will be
  directly deactivated in most cases.

3) Fixes:
---------
- SmartDongle from MicroWorks: Due to an error in the driver, the wrong
  buffer was sent to the USB device during a control transfer. Now the
  correct key is sent to the dongle and the security state is set
  correctly. → fixed



Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.4.12

New Features/Changes/Fixes: since 1.4.5

1) General:
-----------
- Command line interface: CLI Tool "utnm.exe"" added. USB Devices can be
  activated and deactivated by using the command line interface, adding
  highly sophisticated scriptability to the UTN Manager.
- Group Plugin: If several devices are connected to a UTN server and are
  identical in product id and vendor id, the availability of the devices is
  checked. The first free device will be activated (and later on deactivated,
  optionally). 
- UTN actions: These are small programs used for the automatic activation and
  deactivation of device connections. UTN actions can also automate the
  starting and closing of an application in combination with a device
  connection.
  The process defined in the UTN action will run automatically
  after the execution of the file. Since the ’SEH UTN Service’ is active in
  the background, the user is not required to start the SEH UTN Manager
  interface.
- Action wizard: A wizard within the SEH UTN Manager to guide through the 
  process of creating a UTN Action.
- Installation mode: Service version pre-selected by a new installation

2) Changes: 
----------- 
- Internal change: The internal communication between the service and the UTN 
  Manager is now based on TCP.

3) Fixes:
---------
- Overall stability improvements
- New and improved USB Port key encryption. From now on a SHA1 Hash (20 Byte
  hash length) is used (with a random 4byte value for the Hash generation).
  (New software version on the UTN server required, see above)
- The IME warning is always shown if the UTN Manager is started in an Asian
  language (exception: Windows XP and Windows 2003). The warning can be
  deactivated. However, after a reinstallation or update the warning will be
  shown again.
- Encryption (RC4, AES) properly functioning again
- SEH UTN Service stability issues → fixed
- utnstartapp functionality problems → fixed
- Deactivating a USB device resulted in deactivating devices on other UTN 
  devices → fixed
- Service Version: Running in Administrator mode is displayed in the head line.
- Service Version: "Run-As-Administrator-flag" is set during installation time 
  for the current (installing) user
- Windows 7: Writing properties to the "VirtualStore" inside the registry will 
  be prevented.
- Internal: Heartbeat issues fixed; table and list handling improved
- Internal: table/list handling improved


Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.3.24

New Features/Changes/Fixes: (since 1.3.20)


1) General:
-----------
- 

2) Changes:
-----------
- 

3) Fixes:
---------
- Overall stability improvements   
- Reconnect did not work when Port Key Control was enabled → fixed
- AutoConnect did only work for USB Port 1 → fixed

4) New Devices:
---------------
- 



Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.3.20

New Features/Changes/Fixes: (since 1.3.7)


1) General:
-----------
- 

2) Changes:
-----------
- Service variant is now fully compatible with all 'Automatic Connection' 
  features (Print On Demand, Auto-Connect, Automatic Device Connection,
  Automatic Application Start)
- 'Automatic Connection' improvements:
	* Automatic Application Start
	* utnstartapp.exe helper program
- Add UTN Server manually
- Support for USB port configuration (USB port naming)
- Automatic Update with Proxy Support

3) Fixes:
---------
- Overall stability improvements
- On grayed out myUTNs 'Set IP address...' was available → fixed
- USB devices could be activated by several UTN Managers at the same time 
  (with faulty operations) → fixed
- Changes in the clients system time resulted in sporadic disconnects of some
  dongles (Aladdin, Kobil, TDI) → fixed

4) New Devices:
---------------
- iPhone 3/4 supported
- Plustek Smart Office PS406 supported
- ACR 38 Smartcard Reader supported
- Primera LX900 supported



Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.3.7

New Features/Changes/Fixes: (since 1.3.3)


1) General:
-----------
- 

2) Changes:
-----------
- Usage of several EPSON Scanner (e.g. "ES-D400" and "GT-S80") simultaneously in 
  combination with EPSON Eventmanager is now supported.

3) Fixes:
---------
- Values in the selection lists (global and user list) were incorrect.
- Autoconnect functionality did not work in combination with the USB port key
  feature (Service variant, myUTN-80).
- Adding an UTN server manually with incorrect or missing IP settings 
  lead to an unstable UTN Manager.
- Device Assignment errors were incorrectly displayed.
- Overall stability improvements


Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.3.3

New Features/Changes/Fixes: (since 1.2.6)


1) General:
-----------
- Copyright changed to 2010
- Logging Function added(Support Option)

2) Changes:
-----------
- At application start a default language is derived from
  HKLM/Software/SEH UTN Manager/Installer
- New devices are supported:
  Prolific USB-to-Serial Adapter driver adjustments 

3) Fixes:
---------
- Auto-Connect mechanism has been revised.
- Re-Connect mechanism has been revised and optimised for 
  myUTN Software ≥ 14.0.15.
- Software Update for the SEH UTN Service variant has been revised.


Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.2.6

New Features/Changes/Fixes: (since 1.1.17)


1) General:
-----------
- The SEH UTN Manager is now available in two versions:
  * Single-User Version (SEH UTN Manager)
  * Multi-User Version (SEH UTN Manager + SEH UTN Service)
- 64bit Windows OS supported
- UTN Manager is now a code-signed application.

2) Changes:
-----------
- USB Devices can be deactivated via the myUTN Control Center. myUTN Software 14.0.11 is needed for this feature.
- USB Devices can be deactivated via the context menu of the myUTN Windows tray icon.
- Device access control implemented
- Installation for the current user or for all users of the system is now supported by the installer.
- New devices are supported:
  * Sagem Fingerprint Scanner
  * Rohde & Schwarz NRP-Z1
  * Panasonic TDA-30 telephone switchboard

3) Fixes:
---------
- UTN Manager install/uninstalling procedure has been improved.
- Re-Connect mechanism has been improved.



Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.1.17

New Features/Changes/Fixes: (since 1.1.13)

1) General:
-----------
- Copyright changed to 2009
- New Feature: SSL encrypted communication to myUTN products   

2) Changes:
-----------
- Online Help updated
- Support for several USB devices improved
- UTN Manager install/uninstalling procedure has been improved

3) Fixes:
---------
- Reactivation after the PC system had entered sleepmode could
 cause the UTN manager to stall.



Release Notes:
---------------------------------------------------------------------------

New Software Version:   1.1.13

New Features/Changes/Fixes: (since 1.1.6)


1) General:
-----------
-  

2) Changes:
-----------
- In case of a detected audio or video device, the USB Manager will not allow
  the particular device to be enabled. This is because isochronous transfer is 
  not supported, yet.
- Support for VMWare ESX Server 
- Support for several USB devices improved
- UTN Manager install/uninstalling procedure has been improved

3) Fixes:
---------
- Activating more than one USB device at a time could cause the 
  USA manager to stall.
  

  
